added more info
See if this link brings up your modem login page http://10.1.1.1
If it asks for a username and password, it's usually something like admin, admin or admin, password.
If that gets you into the modem then follow these steps
Click "Advanced Setup", accept warning
Click WAN
Click on Add
Set the "ATM PVC Configuration" settings as VPI 8 and VCI 35. Service Catogory is "UBR Without PCR" and the Quality of Service tick-box leave unchecked.
Click Next
Select "Bridging"
Encapsulation mode is set to "LLC/SNAP-BRIDGING"
Click Next
Ensure that the settings are "TICK" enable Bridge Service, Service Name br_8_35
Click Next
Click Save
Now click Edit next to the first WAN entry, (protocol PPPoE)
Click Next, Next and Next
On Network Address Translation Settings page, UNTICK "Enable WAN Service"
Click Next then click Save
Confirm that Bridge (in Protocol) is the only WAN connection that has state of ENABLED
Modem should now be in FULL bridge mode.
Last edited by menaice; 02-17-2011 at 02:41 PM.
|