Forum

Originally Posted by Brainbuster (Post 477581)

I did all these steps (which is basically in the Stealth book),
except for rebooting my modem.

I just unplugged my wireless router, then plugged it back in. That did it.

So maybe it is not necessary to turn off and turn back on the modem.
I did not do it, yet I got an entirely new i.p. address.

Originally Posted by Hubert128 (Post 657315)

I have a ARRIS modem/router in one and when I go in to the router I can not

change any number as at a regular nice netgear router I had before any

suggestions to my problem?

Should I:smash: the ARRIS and get a new modem and router?

Originally Posted by xshell (Post 853391)

i have a netgear router and i used to do this all the time years ago. now recently i got back into selling and need to make a new account.

but when i try to change my mac address it allows me but it doesnt change my ip address. and i know my isp is dynamic because it allows me to change it from static to dynamic in my router configuration AND i used to do this all the time easily.

now i have no idea what im doing wrong its just not changing my IP how sad :( :doh::doh::doh::doh::doh::doh:

Originally Posted by Vicvelcro (Post 96876)

To begin with, this applies to cable modems connected via the ethernet port to a router.
DOES NOT APPLY TO USB CONNECTIONS. DOES NOT APPLY TO MODEM CONNECTED DIRECT TO NETWORK ADAPTER.
If you plug your modem into your PC via USB, stop doing that. You lose speed and you give away secrets.

Your cable modem gets IP based on the MAC of what it is connected TO, not the MAC of the modem itself.
If your ISP has assigned you a STATIC IP address, you're stuck with it. It's not common for them to do that, though.

If you are looking for the walkthrough for Cable Modem Connected directly to NIC:
http://www.aspkin.com/forums/ebay-tr...-your-nic.html


[begin modem/router]
01a. Goto IP Chicken - Whats my IP address? ip address lookup and write your current ip address down.
02a. Change the MAC ID for the ROUTER.
02b. Open your browser and enter the information to access the web-setup to your router (usually http://192.168.1.1)
You can find this in your router manual or by viewing the status of your ethernet. It is your default gateway.
02c. You may get a popup asking for login name and password. If you didn't change it, try admin admin or admin and blank.
Different routers have different factory default login/password. Google 'router default password <your brand>'.
03a. Look around in the setup for the option for MAC address. Some routers have many MAC addresses. you need WAN MAC.
If you only find one MAC setting, obviously that's the one you want.
04a. Do NOT choose to clone any MAC already in your system. Change the numbers in the last 2 pairs as you wish.
MAC is in this format - xx:xx:xx:xx:xx:xx - and the first 4 sets need to stay as they are. The last pairs change.
You can make those any hex numbers between 00-FF. Set this manually. Don't CLONE anything.
05a. After you change, you need to save the settings. So click save.
06a. You can either reboot the router or you can Release DHCP then Renew DHCP from the router, if you see the option.
07a. Regardless of what you did for 06a, unplug and replug your MODEM while the router is still doing it's thing.
08a. Goto IP Chicken - Whats my IP address? ip address lookup and compare it to what you got from 01a. It should be different.
If it is still the same, either you missed a step or your IP is STATIC.
[end modem/router]

NOTES:
001 You can go back to a previous IP by changing your MAC back to what it was for that IP, up to a point. After a few hours, you can't get it back. Some ISPs hold it in reserve for 24 hours. Some for 1 hour. Orion has a great thread going for this. See http://www.aspkin.com/forums/ebay-tr...d-numbers.html

002 Different routers put the MAC on different pages. It's in there somewhere.

003 Every network device has a MAC address. Do not set the router MAC to be identical to any other MAC in your system. You will get collisions which may freeze your system or may cause your modem to go into a reboot loop. It's very annoying. It may lock you out of your router.

004 For DSL, go see ebayhateluv's excellent thread here http://www.aspkin.com/forums/ebay-tr...p-address.html

Originally Posted by Brainbuster (Post 477581)

I did all these steps (which is basically in the Stealth book),
except for rebooting my modem.

I just unplugged my wireless router, then plugged it back in. That did it.

So maybe it is not necessary to turn off and turn back on the modem.
I did not do it, yet I got an entirely new i.p. address.

Originally Posted by somanyquestions (Post 1132992)

Is this also applicable for fiber connections?

Originally Posted by Angelus512 (Post 1137240)

So once an IP address is different even if its just one digit for example
144.133.200.21 becomes 144.133.200.20 then thats good enough? I mean it is now a different IP

Originally Posted by Angelus512 (Post 1137240)

So once an IP address is different even if its just one digit for example
144.133.200.21 becomes 144.133.200.20 then thats good enough? I mean it is now a different IP

Originally Posted by cjw7 (Post 1144654)

Does using different profiles in firefox work instead of user accounts? Do different profiles on same user account require different IPs?

Originally Posted by cjw7 (Post 1144687)

I was using different user IDs but never changed my ip address between each user ID and I've never been linked that way.
I would rather use profiles in firefox on same user ID since it's much faster, but I'm worried that ebay can link using a combination of ip address and something else if I do it that way. I can't find much info on if ebay can link using ff profiles within same user ID.

I'm thinking that ip address doesn't matter that much by itself, but maybe ebay uses ip in combination with something else when using ff profiles in same user ID.